Does the FRP water tank have special requirements for the ground of the installation environment?
“Fiberglass water tanks have a series of strict requirements for the ground of the installation environment, which are designed to ensure the stability, safety and long-term use of the water tank. Specifically, the ground of the installation environment must meet the following points:
First, in terms of flatness, the ground of the installation site must be flat and solid, and there must be no obvious unevenness. Before installing the water tank, be sure to accurately level the upper plane of the cement foundation to ensure that the entire plane is on the same horizontal plane, and the error is strictly controlled within ±0.5cm to ensure the stability of the water tank after installation.
Second, the ground must have sufficient bearing capacity to support the total weight of the water tank and its full weight. For larger water tanks or water tanks that weigh more than a certain limit (such as more than 5 tons), it may be necessary to design a special bearing foundation, and the bearing capacity of the foundation should be at least twice the weight of the fully loaded water tank to ensure the safe and stable operation of the water tank.
In addition, environmental stability is also a key factor. The installation site should be away from areas with frequent vibrations or vibrations, because long-term vibrations may have an adverse effect on the structural stability of the water tank and shorten its service life.
At the same time, for In order to facilitate future maintenance and inspection, sufficient inspection channels should be reserved during installation. Generally speaking, there should be at least 500mm of space between the box and the wall, and at least 500mm of space between the ground and the bottom of the box to ensure that maintenance personnel can easily enter and operate.
Although the FRP material itself has good corrosion resistance, the installation ground should still be kept dry to avoid long-term immersion in water to prevent the foundation from sinking or corrosion.
In addition, it is also necessary to avoid installing the water tank in an environment where it may be exposed to harmful chemicals or corrosive substances to avoid damage to the box.
Finally, when choosing the installation location, the surrounding environmental factors must be considered comprehensively. For example, if the water tank is installed on the roof, it is necessary to avoid the reflection of the stainless steel mirror from interfering with the surrounding office or living environment. At the same time, when installing on the ground, it is also necessary to ensure that the location of the water tank will not affect the normal life of the surrounding residents.
In summary, when choosing the installation environment of the FRP water tank, in addition to ensuring that the physical conditions of the ground meet the requirements, the surrounding environmental factors must also be considered comprehensively to ensure the safe operation of the water tank and extend its service life. ”
Keywords :
Rectangular FRP Tank
Space-saving Design
High Strength
Corrosion Resistant
Leak-proof
Customizable Dimensions
UV Protection
Easy Assembly
Lightweight Construction
Long-lasting Performance
Potable Water Storage
Chemical Resistance
Fire Retardant
Environmental Friendly
Indoor and Outdoor Use
Inquiry please contact:
Email : le@chinaestop.cn
Whatsapp✆:+0086-18830902007
Web: www.cnhbwatertank.cn
————————————————————————————————————————
“ Wish to be your best partner in China! Welcome to visit our company”